TYPE:
The Crane shall be a Pedestal type.
CAPACITY:
The Crane shall have a designated
lifting capacity of 2000 lbs.
BOOM HEIGHT:
The Boom shall be a 15 position
manually adjustable boom, with up to 84" of lifting height. (Based on standard 24" pedestal height)
BOOM LENGTH:
The Boom shall have a adjustable
length of 52" to 72" in three stages.
ROTATION:
The Crane shall have a 360-degree
manual rotation on machined surfaces, with two needle bearings and one thrust bearing that are
environmentally sealed.
HOIST:
The Hoist Motor shall be 12 volt D.C. powered, with a dual
internal breaking system. Hoist shall have power up and power down.
CABLE:
The Cable shall be 25" X 7/32" in diameter galvanized aircraft
quality cable, with a single line breaking strength of 5600 lbs., and a safety hook.
CONTROL:
A Hand Held Pendant Control, 10
feet in length, shall be furnish for controlling the hoisting
function and it shall be 12-volt D.C. powered. Pendant
Control shall be weather resistant, with a solid rubber grip.
POWER SOURCE:
The Power Source shall be the
vehicles own 12-volt D.C. battery.
MOUNTING:
The Crane shall have a 12" x 12"
mounting base with a 9" square bolt pattern, 1/2" Grd. 8 Bolts.
WIRING:
The Crane shall be pre-wired from
the factory and tested. The crane shall be provided with 25" of
4-gauge power cable and 10" of 4 gauge ground cable. The entire electrical system shall be circuit breaker protected.
SAFETY:
The Crane shall be designed and manufactured according to the applicable ANSI standards for mobile cranes. The Crane shall be clearly marked with Maximum Load & Warning Decals.
DOCUMENTATION:
The Crane shall be furnished with detailed Installation
Instructions, Operation and Safety Instructions, Parts List, and Maintenance Instructions.
FINISH COATING:
The Crane shall be finished with a durable Powder Coating, light gray in color.
WARRANTY:
Manufacturer shall warrant the materials and workmanship for a period of one year from the date of delivery (excluding cable).
